Difference between revisions of "TUFLOW Message 2035"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary. | |message_desc=Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary. | ||
|suggestions=Seperate incompatible boundary types. | |suggestions=Seperate incompatible boundary types. | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 11:02, 23 December 2022
TUFLOW Message
ERROR 2035 - Trying to apply a Q boundary to a 2D cell already assigned a link or a H or S boundary.
Alternate Message
NA
Message Type
ERROR
Description
Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary.
Suggestions
Seperate incompatible boundary types.
| Up |
|---|
 2xxx Messages
|