Difference between revisions of "TUFLOW Message 2078"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used. | |message_desc=End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used. | ||
|suggestions=Check elevation at start of HX breakline, if none specified closest elevation point is used. | |suggestions=Check elevation at start of HX breakline, if none specified closest elevation point is used. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 11:58, 23 December 2022
TUFLOW Message
CHECK 2078 - End of 3D HX breakline is dangling.
Alternate Message
CHECK 2078 - End of 3D TIN breakline is dangling.
CHECK 2078 - End of 3D line is dangling.
Message Type
CHECK
Description
End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used.
Suggestions
Check elevation at start of HX breakline, if none specified closest elevation point is used.
| Up |
|---|
 2xxx Messages
|