TUFLOW Message 3008: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR 3008 |
|tuflow_message=ERROR 3008 - tau0 must be >= 0. |
||
ERROR 3008 |
|alt_msg=ERROR 3008 - muLow must be >= 0.<br> |
||
ERROR 3008 - muHigh must be >= <number>. |
|||
<br> |
|||
|alt_msg= |
|||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=For the non-Newtonian viscosity formulation both tau0 and muLow cannot be negative. Further, the upper limit muHigh cannot be less than muLow. |
|||
|message_desc=''SMAGORINSKY turbulence model:''<br> |
|||
|suggestions=Ensure the supplied viscosity coefficients are correct. |
|||
When SMAGORINSKY turbulence model is used, ''nut_m'' is the Smagorinsky coefficient and ''nut_c'' is a constant eddy viscosity component. These two parameter must be >=0.<br><br> |
|||
''PRANDTL turbulence model:''<br> |
|||
If the PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale ''l'' and the turbulence intensity ''k'' as follows:<br> |
|||
[[File:PRANDTL.png | 150px]] |
|||
<br> |
|||
where ''Cc (nut_c)'' is a constant component of the viscosity, and the maximum value of ''l'' is limited by ''Cm * depth'', where ''Cm (nut_m)'' is a coefficient to define the turbulence length scale. |
|||
|suggestions=Make sure the parameters specified by the <font color="blue"><tt>Viscosity Coefficients </tt></font> <font color="red"><tt>== </tt></font> command is larger than zero. |
|||
|discussion_page=* [[Talk:TUFLOW Message 3008|Discuss Message 3008]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_3007|Message 3007]] |
|||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_3009|Message 3009]] |
|||
}} |
}} |
||
Latest revision as of 10:10, 3 March 2023
TUFLOW Message
ERROR 3008 - tau0 must be >= 0.
Alternate Message
ERROR 3008 - muLow must be >= 0.
ERROR 3008 - muHigh must be >= <number>.
Message Type
ERROR
Description
For the non-Newtonian viscosity formulation both tau0 and muLow cannot be negative. Further, the upper limit muHigh cannot be less than muLow.
Suggestions
Ensure the supplied viscosity coefficients are correct.
| Up |
|---|
 3xxx Messages
|