Difference between revisions of "TUFLOW Message 1032"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=Cross section properties can't be interpolated. | |message_desc=Cross section properties can't be interpolated. | ||
|suggestions=Use a connector (X) at junctions for side branches to indicate main branch. | |suggestions=Use a connector (X) at junctions for side branches to indicate main branch. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 13:49, 22 December 2022
TUFLOW Message
ERROR 1032 - Branch splits downstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Alternate Message
ERROR 1032 - Branch splits upstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Message Type
ERROR
Description
Cross section properties can't be interpolated.
Suggestions
Use a connector (X) at junctions for side branches to indicate main branch.
| Up |
|---|
 1xxx Messages
|