Difference between revisions of "TUFLOW Message 1200"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | |message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | ||
|suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually. | |suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:48, 22 December 2022
TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.
Alternate Message
NA
Message Type
CHECK
Description
Node at start of connector can only be used for setting up channel inverts and pit channels.
Suggestions
Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
| Up |
|---|
 1xxx Messages
|