Tuflow

TUFLOW Message 3506: Difference between revisions

Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
 
(13 intermediate revisions by 5 users not shown)
Line 1:
{{TUFLOW_Message
|tuflow_message=CHECK 3506: - Limiting SGS Grid sample frequency to upper limit of 31'a'., sample distance of 'ab'.
<br>
|alt_msg=CHECK 3506 - Limiting SGS sample frequency to upper limit of 'a', from 'b'.<br>
|alt_msg=N/A
CHECK 3506 - Limiting SGS sample frequency to lower limit of 'a', from 'b'.<br>
 
|type=[[CHECK]]
|message_desc=Too high SGS sample frequency can result in long pre-processing time, and users may not benefit from applying a super fine sample distance against the model cell size. In general, we found a sample frequency smaller than 31 is sufficient for most of natural water ways or artificial structures, and the default frequency limit is 31 (per face).<br>
|message_desc=The maximum number of sampling points for face is 31.
The minimum limit of SGS sample frequency is 3. Anything below that will be adjusted to 3.
|suggestions=If more resolution is required, cell size can be lowered.
|suggestions=The default limit can be changed by using the .tcf command <font color="blue"><tt>SGS Max Sample Frequency</font><font color="red"> ==</tt></font>". Note, a hard limit of 127 per face still applies. <br>
Please refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information.
 
|discussion_page=* [[Talk:TUFLOW Message 3506|Discuss Message 3506]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_3504|Message 3504]]
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|nextlink=[[TUFLOW_Message_3517|Message 3517]]
}}
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_3506"