TUFLOW Message 2302: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 4: | Line 4: | ||
|type=[[WARNING]] |
|type=[[WARNING]] |
||
|message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded. |
|message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded. |
||
|suggestions=The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the <tt>GA Maximum Iterations == </tt> command. The <tt>GA Convergence Value == </tt> command is used to set the convergence tolerance. Refer to the TUFLOW |
|suggestions=The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the <tt><font color="blue">GA Maximum Iterations </font><font color="red">== </font></tt> command. The <tt><font color="blue">GA Convergence Value </font><font color="red">== </font></tt> command is used to set the convergence tolerance. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more guidance on these commands. |
||
|discussion_page=* [[Talk:TUFLOW Message 2302|Discuss Message 2302]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_2242|Message 2242]] |
|||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_2304|Message 2304]] |
|||
}} |
}} |
||
Latest revision as of 09:37, 23 September 2024
TUFLOW Message
WARNING 2302 - Green Ampt solution may not have converged.
Alternate Message
NA
Message Type
WARNING
Description
The maximum number of iterations of the Green Ampt solution have been exceeded.
Suggestions
The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the GA Maximum Iterations == command. The GA Convergence Value == command is used to set the convergence tolerance. Refer to the TUFLOW Manual for more guidance on these commands.
| Up |
|---|
 2xxx Messages
|