Difference between revisions of "TUFLOW Message 1124"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel. | |message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel. | ||
|suggestions=Check if the cross-section line is crossing with multiple 1d channels. | |suggestions=Check if the cross-section line is crossing with multiple 1d channels. | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:19, 22 December 2022
TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.
Alternate Message
NA
Message Type
ERROR
Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
Suggestions
Check if the cross-section line is crossing with multiple 1d channels.
| Up |
|---|
 1xxx Messages
|