Tuflow

TUFLOW Message 1401: Difference between revisions

Browse history interactively
Content deleted Content added
VisualWikitext
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1401 - Cannot connect Node with a X1DH link as the node is already connected to an external 1D domain via a X1DQ link. |alt_msg=NA |type=[[..."
 
No edit summary
 
(8 intermediate revisions by 5 users not shown)
Line 1:
{{TUFLOW_Message
|tuflow_message=ERRORCHECK 1401 - Cannot<x connectnumber> Nodeculvert(s) withnot aused X1DHfor linkdetermining aslosses theat nodeManhole is<Manhole already connected to an external 1D domain via a X1DQ link.ID>
|alt_msg=NA
|type=[[WARNINGCHECK]]
|message_desc=When applying the Engelhund loss approach for manholes (refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>), if an incoming culvert enters above the obvert of the highest outlet, the culvert is not included in the manhole loss calculations.
|message_desc=A TUFLOW 1D (ESTRY) node is trying to be connected to an external 1D scheme using a X1DH link, but the TUFLOW node is already connected to an external 1D node using a X1DQ link.
|suggestions=Review connectionsthe toinverts externalon 1Dthe schemeculverts. for thisA nodepoint andobject removein a "1d_mh" layer can be used to set the inappropriateloss approach at each onemanhole.
 
|discussion_page=* [[Talk:TUFLOW Message 1382|Discuss Message 1382]]
 
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1381|Message 1381]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1991|Message 1991]]
}}
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_1401"