Difference between revisions of "TUFLOW Message 2302"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 4: Line 4:
 
|type=[[WARNING]]
 
|type=[[WARNING]]
 
|message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded.  
 
|message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded.  
|suggestions=The number of iterations of the Green-Ampt infiltration convergence test have been exceeded.  The number of iterations can be changed with the <tt><font color="blue">GA Maximum Iterations </font><font color="red">== </font></tt> command.  The <tt><font color="blue">GA Convergence Value </font><font color="red">== </font></tt> command is used to set the convergence tolerance.  Refer to the TUFLOW manual for more guidance on these commands.
+
|suggestions=The number of iterations of the Green-Ampt infiltration convergence test have been exceeded.  The number of iterations can be changed with the <tt><font color="blue">GA Maximum Iterations </font><font color="red">== </font></tt> command.  The <tt><font color="blue">GA Convergence Value </font><font color="red">== </font></tt> command is used to set the convergence tolerance.  Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more guidance on these commands.
  
|prelink=[[TUFLOW_Message_2244|Message 2244]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2304|Message 2304]]
 
 
}}
 
}}

Latest revision as of 09:37, 23 September 2024

TUFLOW Message
WARNING 2302 - Green Ampt solution may not have converged.

Alternate Message
NA

Message Type
WARNING

Description
The maximum number of iterations of the Green Ampt solution have been exceeded.

Suggestions
The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the GA Maximum Iterations == command. The GA Convergence Value == command is used to set the convergence tolerance. Refer to the TUFLOW Manual for more guidance on these commands.


Up
Go-up.png 2xxx Messages