Difference between revisions of "TUFLOW Message 1066"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details | + | |message_desc=For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details, refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>. |
|suggestions=If using P values, these must be either 1, 2 or 3. | |suggestions=If using P values, these must be either 1, 2 or 3. | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
}} | }} | ||
Latest revision as of 09:45, 23 September 2024
TUFLOW Message
ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a,
Alternate Message
NA
Message Type
ERROR
Description
For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details, refer to the TUFLOW Manual.
Suggestions
If using P values, these must be either 1, 2 or 3.
| Up |
|---|
 1xxx Messages
|