Difference between revisions of "TUFLOW Message 1101"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=ERROR 1101 - Less than the mandatory 10 1d_pit attributes found. | |alt_msg=ERROR 1101 - Less than the mandatory 10 1d_pit attributes found. | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=1D network layers should have the GIS attributes as described in | + | |message_desc=1D network layers (1d_nwk) should have the GIS attributes as described in the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>. |
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br> | |suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br> | ||
Check that the 1d_nwk layer being read in via the <font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font> command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | Check that the 1d_nwk layer being read in via the <font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font> command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | ||
Latest revision as of 08:51, 23 September 2024
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
ERROR 1101 - Less than the mandatory 10 1d_pit attributes found.
Message Type
ERROR
Description
1D network layers (1d_nwk) should have the GIS attributes as described in the TUFLOW Manual.
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release.
Check that the 1d_nwk layer being read in via the Read GIS Network == command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
| Up |
|---|
 1xxx Messages
|