Difference between revisions of "TUFLOW Message 2853"
Jump to navigation
Jump to search
Ellis Symons (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=The number of Quadtree cells selected by the boundary (one of <tt>HT</tt>, <tt>HQ</tt>, <tt>SX</tt>, <tt>QT</tt>) has exceeded the limit within TUFLOW. The limit is a hardcoded value of 500,000. |
| − | |suggestions= | + | |suggestions=This is typically triggered by a downstream boundary (<tt>HT</tt> or <tt>HQ</tt>) being snapped to the perimeter of the code polygon and selecting every cell along the edge of the model. The boundary should be split into smaller sections so that each line selects less than 500,000 cells. |
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 00:34, 28 May 2025
TUFLOW Message
ERROR 2853 - Exceeded GIS point limit - limit = "<>".
Alternate Message
NA
Message Type
ERROR
Description
The number of Quadtree cells selected by the boundary (one of HT, HQ, SX, QT) has exceeded the limit within TUFLOW. The limit is a hardcoded value of 500,000.
Suggestions
This is typically triggered by a downstream boundary (HT or HQ) being snapped to the perimeter of the code polygon and selecting every cell along the edge of the model. The boundary should be split into smaller sections so that each line selects less than 500,000 cells.
| Up |
|---|
 2xxx Messages
|