Difference between revisions of "TUFLOW Message 3500"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3500 - Could not allocate temporary memory (RAM) for processing HPC weir angle.
+
|tuflow_message=Error 3500 - Could not allocate temporary memory (RAM) for processing SGS Grid.
|alt_msg=<br>
+
|alt_msg=ERROR 3500 - Could not allocate temporary memory (RAM) for processing HPC weir angle.
  
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=
+
|message_desc=There is not enough free memory to initialise the model.
|suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com].
+
|suggestions=Use the latest TUFLOW release available. Optimise the model, see <u>[[TUFLOW_Simulation_Speed | Reducing RAM requirements]]</u> for more information.
  
|prelink=[[TUFLOW_Message_3048|Message 3048]]
 
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|nextlink=[[TUFLOW_Message_3501|Message 3501]]
 
 
}}
 
}}

Latest revision as of 11:47, 2 October 2023

TUFLOW Message
Error 3500 - Could not allocate temporary memory (RAM) for processing SGS Grid.

Alternate Message
ERROR 3500 - Could not allocate temporary memory (RAM) for processing HPC weir angle.

Message Type
ERROR

Description
There is not enough free memory to initialise the model.

Suggestions
Use the latest TUFLOW release available. Optimise the model, see Reducing RAM requirements for more information.


Up
Go-up.png 3xxx Messages