Difference between revisions of "TUFLOW Message 2576"
Jump to navigation
Jump to search
| (One intermediate revision by one other user not shown) | |||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=As of the 2025.1.0 release, the maximum number of vertical groundwater layers is 10. |
| − | |suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com]. | + | |suggestions=Please use less than 10 layers. If more than 10 layers are needed, please contact [mailto:support@tuflow.com support@tuflow.com]. |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} | ||
Latest revision as of 09:25, 2 June 2025
TUFLOW Message
ERROR 2576 - Vertical groundwater layer must be between 1 and <>: "<>".
Alternate Message
NA
Message Type
ERROR
Description
As of the 2025.1.0 release, the maximum number of vertical groundwater layers is 10.
Suggestions
Please use less than 10 layers. If more than 10 layers are needed, please contact support@tuflow.com.
| Up |
|---|
 2xxx Messages
|