Difference between revisions of "TUFLOW Message 3509"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=Invalid SGS ZH | + | |message_desc=Invalid SGS ZH Sample Ratio. This value is used to control the area used for SGS at ZH locations and it should be between 0 and 1. The area is set to <tt><''ratio''> X ''cell_area''</tt> to sample and generate Z values around a cell corner (the sampled elevations are not used in the hydraulic computations, only for map output). |
| − | |suggestions= | + | |suggestions=Ensure the .tgc command "<tt><font color="blue">SGS ZH Sample Ratio</font><font color="red"> ==</font></tt>" is set to a value between 0 and 1. |
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
}} | }} | ||
Latest revision as of 11:24, 12 November 2024
TUFLOW Message
ERROR 3509 - Invalid SGS ZH SAMPLE RATIO. This value should be 0 ~ 1.
Alternate Message
NA
Message Type
ERROR
Description
Invalid SGS ZH Sample Ratio. This value is used to control the area used for SGS at ZH locations and it should be between 0 and 1. The area is set to <ratio> X cell_area to sample and generate Z values around a cell corner (the sampled elevations are not used in the hydraulic computations, only for map output).
Suggestions
Ensure the .tgc command "SGS ZH Sample Ratio ==" is set to a value between 0 and 1.
| Up |
|---|
 3xxx Messages
|