Difference between revisions of "TUFLOW Message 2589"
Jump to navigation
Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename> |alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <fil...") |
|||
| Line 3: | Line 3: | ||
|alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf. | |alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf. | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in Table 7-6 of the [https://downloads.tuflow.com/_archive/TUFLOW/Releases/2018-03/TUFLOW%20Manual.2018-03.pdf | + | |message_desc=TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in Table 7-6 of the <u>[https://downloads.tuflow.com/_archive/TUFLOW/Releases/2018-03/TUFLOW%20Manual.2018-03.pdf 2018 TUFLOW Manual]</u>. |
|suggestions=Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present. | |suggestions=Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present. | ||
<br>Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa. | <br>Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa. | ||
Latest revision as of 00:20, 22 June 2023
TUFLOW Message
ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>
Alternate Message
ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf.
Message Type
ERROR
Description
TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in Table 7-6 of the 2018 TUFLOW Manual.
Suggestions
Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present.
Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa.
| Up |
|---|
 2xxx Messages
|