Difference between revisions of "TUFLOW SWMM Tutorial M01 Results QGIS"

From Tuflow
Jump to navigation Jump to search
 
(26 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
==SWMM.rpt Output==
 
==SWMM.rpt Output==
−
the SWMM simulation report can be opened using atext editor to review the 1D SWMM model result summary and simulation health.
+
The SWMM simulation report can be opened using a text editor to review the 1D SWMM model result summary and simulation health.
 
<ol>
 
<ol>
−
<li>Open '''TUFLOW\results\TS01_5m_001_swmm.rpt''' in Notepad++
+
<li>In Windows File Explorer, navigate to the '''TUFLOW\results''' folder and open '''TS01_5m_001_swmm.rpt''' in Notepad++.
 
<li>Review the result summary for information such as:
 
<li>Review the result summary for information such as:
−
:*'''Continuity Error (%) .....''': the target value for this metric is less than +-1%
+
:*'''Continuity Error (%) .....''': The target value for this metric is less than +-1%
−
: Various Node Result Summary Reports
+
:* Various Node Result Summary Reports
−
: Various Link / Conduit Result Summary Reports
+
:* Various Link / Conduit Result Summary Reports
−
 
+
<br>
−
'''<font color="red"><<video needed>></font>'''
+
{{Video|name=Animation_TS1_Results_01c.mp4|width=1236}}<br>
 +
</ol>
  
 
==QGIS Result Viewing==
 
==QGIS Result Viewing==
 
<ol>
 
<ol>
−
<li>Open TUFLOW Viewer in the QGIS TUFLOW Plugin.
+
<li>Open TUFLOW Viewer from the TUFLOW Plugin toolbar.<br>
 +
<br>
 +
[[File:tuflow_plugin_tuflow_viewer.png]]<br>
 +
<br>
 
<li>Open the simulation results. There are two options available:
 
<li>Open the simulation results. There are two options available:
−
:* Open 1D and 2D results: '''Select File > Load Results'''. Choose '''TUFLOW\runs\TS01_5m_001.tcf'''
+
:* Open 1D and 2D results: Select File > Load Results. Navigate to the '''TUFLOW\runs''' folder and select '''TS01_5m_001.tcf'''.
−
:* Open 1D (no 2D results): '''Select File > Load Results - Time Series'''. Choose '''TUFLOW\results\TS01_5m_001_swmm_ts.gpkg'''
+
:* Open 1D (no 2D results): Select File > Load Results - Time Series. Navigate to the '''TUFLOW\results''' folder and select '''TS01_5m_001_swmm_ts.gpkg'''.
−
<li> The video example below opens the 1D and 2D results, using the first of the above options. When asked "Do you want to op result GIS layer?", select Yes. Five new files will load to the Layers Panel:
+
<li> The video example below opens the 1D and 2D results, using the first of the above options. When asked 'Do you want to open result GIS layer?', select 'Yes'. Five new files will load to the QGIS Layers Panel:
 +
:*'''TS01_5m_001_swmm_ts_P''': 1D SWMM Node and outlet water level results
 
:*'''TS01_5m_001_swmm_ts_L''': 1D SWMM conduit flow results
 
:*'''TS01_5m_001_swmm_ts_L''': 1D SWMM conduit flow results
−
:*'''TS01_5m_001_swmm_ts_P''': 1D SWMM Node and outlet water level results
+
:*'''TS01_5m_001_PLOT_P''': 1D ESTRY and 2D plot output water level and velocity results ('''Note:''' There are no ESTRY results from this simulation)
−
:*'''TS01_5m_001_PLOT_L''': 1D ESTRY and 2D plot ouput flow results (''Note: there are no ESTRY results from this simulation'')
+
:*'''TS01_5m_001_PLOT_L''': 1D ESTRY and 2D plot output flow results ('''Note:''' There are no ESTRY results from this simulation)
−
:*'''TS01_5m_001_PLOT_P''': 1D ESTRY and 2D plot output water level and velocity results (''Note: there are no ESTRY results from this simulation'')
+
:*'''TS01_5m_001''': 2D TUFLOW results
−
:*'''TS01_5m_001''': 2D TUFLOW Results
+
<br>
−
<li> Set the simulation result plot objects:
+
{{Video|name=Animation_TS1_Results_02d.mp4|width=1350}}<br>
−
:* Select '''TS01_5m_001''' in the Layers Panel to establish it as the active dataset, then choose '''Depth''' as the Result Type in the TUFLOW Viewer Map Outputs list.
+
<li>In the TUFLOW Viewer Panel, select (left click) '''TS01_5m_001''' to establish it as the active dataset. Click on a scalar dataset 'Depth' under the Result Type in the TUFLOW Viewer 'Map Outputs' list. Move the time slider to observe how the results vary at different times during the simulation.<br>
−
:* Select '''TS01_5m_001_swmm_ts_L''' in the Layers Panel, then select '''Flow''' as the Result Type in the TUFLOW Viewer Time Series list.
+
'''Note:''' The styling of the Map Outputs can be changed by right clicking on each result dataset and editing the 'Properties'.
−
:* Select '' Show Current Time'''.
+
<br><br>
−
<li> Move the time slider to observe how the results vary at differetnt times during the simulation.
+
{{Video|name=Animation_TS1_Results_03d.mp4|width=1350}}<br>
 +
<li>In the QGIS Layers Panel, right click '''TS01_5m_001_swmm_ts_L''' and select 'Zoom to Layer(s)'.
 +
<li>Use the 'Select Features' tool to highlight all items included in '''TS01_5m_001_swmm_ts_L'''.
 +
<li>Click on the 'Flow' dataset under the Result Type in the TUFLOW Viewer 'Time Series' list.
 +
<li>Tick on 'Show Current Time'. <br>
 +
'''Note:''' The styling of the labels can be changed by right clicking on the layer and selecting 'Properties...'.  
 +
<br><br>
 +
{{Video|name=Animation_TS1_Results_04d.mp4|width=1350}}<br>
 
</ol>
 
</ol>
−
 
+
<br>
−
'''<font color="red"><<video needed>></font>'''
 
  
 
{{Tips Navigation
 
{{Tips Navigation
 
|uplink=[[TUFLOW_SWMM_Tutorial_M01#Check_Files_and_Results_Output| Back to TUFLOW SWMM Tutorial 1]]
 
|uplink=[[TUFLOW_SWMM_Tutorial_M01#Check_Files_and_Results_Output| Back to TUFLOW SWMM Tutorial 1]]
 
}}
 
}}

Latest revision as of 16:27, 20 May 2024

SWMM.rpt Output

The SWMM simulation report can be opened using a text editor to review the 1D SWMM model result summary and simulation health.

  1. In Windows File Explorer, navigate to the TUFLOW\results folder and open TS01_5m_001_swmm.rpt in Notepad++.
  2. Review the result summary for information such as:
    • Continuity Error (%) .....: The target value for this metric is less than +-1%
    • Various Node Result Summary Reports
    • Various Link / Conduit Result Summary Reports


QGIS Result Viewing

  1. Open TUFLOW Viewer from the TUFLOW Plugin toolbar.

    Tuflow plugin tuflow viewer.png

  2. Open the simulation results. There are two options available:
    • Open 1D and 2D results: Select File > Load Results. Navigate to the TUFLOW\runs folder and select TS01_5m_001.tcf.
    • Open 1D (no 2D results): Select File > Load Results - Time Series. Navigate to the TUFLOW\results folder and select TS01_5m_001_swmm_ts.gpkg.
  3. The video example below opens the 1D and 2D results, using the first of the above options. When asked 'Do you want to open result GIS layer?', select 'Yes'. Five new files will load to the QGIS Layers Panel:
    • TS01_5m_001_swmm_ts_P: 1D SWMM Node and outlet water level results
    • TS01_5m_001_swmm_ts_L: 1D SWMM conduit flow results
    • TS01_5m_001_PLOT_P: 1D ESTRY and 2D plot output water level and velocity results (Note: There are no ESTRY results from this simulation)
    • TS01_5m_001_PLOT_L: 1D ESTRY and 2D plot output flow results (Note: There are no ESTRY results from this simulation)
    • TS01_5m_001: 2D TUFLOW results


  4. In the TUFLOW Viewer Panel, select (left click) TS01_5m_001 to establish it as the active dataset. Click on a scalar dataset 'Depth' under the Result Type in the TUFLOW Viewer 'Map Outputs' list. Move the time slider to observe how the results vary at different times during the simulation.
    Note: The styling of the Map Outputs can be changed by right clicking on each result dataset and editing the 'Properties'.


  5. In the QGIS Layers Panel, right click TS01_5m_001_swmm_ts_L and select 'Zoom to Layer(s)'.
  6. Use the 'Select Features' tool to highlight all items included in TS01_5m_001_swmm_ts_L.
  7. Click on the 'Flow' dataset under the Result Type in the TUFLOW Viewer 'Time Series' list.
  8. Tick on 'Show Current Time'.
    Note: The styling of the labels can be changed by right clicking on the layer and selecting 'Properties...'.



Up
Go-up.png Back to TUFLOW SWMM Tutorial 1
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_SWMM_Tutorial_M01_Results_QGIS&oldid=39654"