Difference between revisions of "XPSWMM Conversion TUFLOW Geometry Control File (TGC)"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) (Created page with "== TUFLOW Geometry Control File (TGC) == The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:...") |
Chris Huxley (talk | contribs) |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
== TUFLOW Geometry Control File (TGC) == | == TUFLOW Geometry Control File (TGC) == | ||
| − | The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains: | + | The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains: |
:* Information on the size and orientation of the grid; | :* Information on the size and orientation of the grid; | ||
:* Grid cell codes (whether cells are active or inactive); | :* Grid cell codes (whether cells are active or inactive); | ||
:* Bed / ground elevations; and | :* Bed / ground elevations; and | ||
:* Bed material type or flow resistance value. | :* Bed material type or flow resistance value. | ||
| − | + | ||
| − | The TGC | + | The TGC does not require any updates; however, it is recommended to review the TGC (e.g. '''1D2D_Urban_001.tgc''') before running the simulation to ensure all commands are correct. |
<br><br> | <br><br> | ||
{{Tips Navigation | {{Tips Navigation | ||
| − | |uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to XPSWMM to TUFLOW Conversion Page]] | + | |uplink=[[XPSWMM_Conversion_TUFLOW_Control_File_(TCF) | Continue to Next Step: "TUFLOW Control File (TCF)"]] |
| + | }} | ||
| + | {{Tips Navigation | ||
| + | |uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to Main XPSWMM to TUFLOW Conversion Page]] | ||
}} | }} | ||
Latest revision as of 09:39, 20 August 2024
TUFLOW Geometry Control File (TGC)
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:
- Information on the size and orientation of the grid;
- Grid cell codes (whether cells are active or inactive);
- Bed / ground elevations; and
- Bed material type or flow resistance value.
The TGC does not require any updates; however, it is recommended to review the TGC (e.g. 1D2D_Urban_001.tgc) before running the simulation to ensure all commands are correct.
| Up |
|---|
 Continue to Next Step: "TUFLOW Control File (TCF)"
|
| Up |
|---|
| Back to Main XPSWMM to TUFLOW Conversion Page
|