Difference between revisions of "XPSWMM Conversion TUFLOW SWMM Control File (TSCF)"

Latest revision as of 14:13, 22 February 2024

The TUFLOW SWMM Control File (TSCF) is used as the file that references all EPA SWMM inputs.

In Windows File Explorer, navigate to the TUFLOW\model folder and create a new blank text file with the extension .tscf (e.g. 1D2D_Urban_001.tscf).
Open the TSCF into a Text Editor (Notepad++ is recommended) and add the following commands.
Read SWMM == swmm\1D2D_Urban_HDR_001.inp ! 1D SWMM Pipe Network input file
Read SWMM == swmm\1D2D_Urban_RNF_001.inp ! 1D SWMM Hydrology input file
Read SWMM == swmm\swmm_inlet_curves_XP_001.inp ! 1D SWMM Inlet Curves input file
Read GIS SWMM Inlet Usage == swmm\swmm_iu_XP_001.gpkg >> inlet_usage ! 1D SWMM Pipe Network Inlet Usage layer
Save the TSCF.

Up
Continue to Next Step: "TUFLOW Boundary Control File (TBC)"

Up
Back to Main XPSWMM to TUFLOW Conversion Page

@@ Line 8: / Line 8: @@
 <font color="blue"><tt>Read SWMM </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>swmm\swmm_inlet_curves_XP_001.inp </tt></font> <font color="green"><tt> ! 1D SWMM Inlet Curves input file</tt></font><br>
 <font color="blue"><tt>Read GIS SWMM Inlet Usage</tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>swmm\swmm_iu_XP_001.gpkg >> inlet_usage </tt></font> <font color="green"><tt> ! 1D SWMM Pipe Network Inlet Usage layer</tt></font>
+<li> Save the TSCF.
 <br><br>
 {{Video|name=Animation_XPtoTUFLOW_Sim_Control_01a.mp4|width=1350}}