Difference between revisions of "TUFLOW Message 2904"

From Tuflow
Jump to navigation Jump to search
 
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time". Use the "Mass Balance Output Interval ==" command, or one of the "Map Output Interval" and the "Time Series Output Interval" command.
+
|tuflow_message=WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time".  
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]

Latest revision as of 22:57, 9 September 2024

TUFLOW Message
WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time".

Alternate Message
NA

Message Type
WARNING

Description
The model has failed to set up a mass balance output interval and will instead use an interval of the end time, minus the start time. If you would like a more frequent interval, see the below suggestion.

Suggestions
Use one of the following commands:

  • "Mass Balance Output Interval == "
  • "Map Output Interval == "
  • "Time Series Output Interval == "

Note, if using the Map Output Interval option, ensure that the value is being initialised. For example, for the following commands, the Map Output Interval command is used however as there is only one output format (TIF) and this is being set to an interval of 0 the mass balance output interval would not be initialised:

    Map Output Format == TIF
    Map Output Interval == 300
    TIF Map Output Interval == 0




Up
Go-up.png 2xxx Messages