Tuflow

TUFLOW 1D Flood Modeller Connectivity: Difference between revisions

Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
No edit summary
 
Line 7:
* A "'''X1DQ'''" link where a Flood Modeller inflow/outflow is being applied at the ESTRY node (i.e. Flood Modeller sends ESTRY a discharge and ESTRY sends back a water level).
 
An ESTRY X1DH (the default) would be used for most Flood Modeller ESTRY links where TUFLOW is discharging into Flood Modeller. The discharge will be applied to the Flood Modeller 1D model as a lateral inflow. The Flood Modeller 1D node on the receiving end of an X1DH connection must be a channel unit (eg,e.g. River, Interpolate, Replicate or Conduit) and must not be the end node of a reach (i.e., distance to next cross section of zero). This is commonly used when representing a pipe network within ESTRY which discharges to an open channel represented in Flood Modeller as per Figure 1.
 
[[File:X1DH Link.png|thumb|Border|none|700px|Figure 1: TUFLOW Pipe Network Discharging to a Flood Modeller Representation of an Open Channel]]
Retrieved from "https://wiki.tuflow.com/TUFLOW_1D_Flood_Modeller_Connectivity"