FM Tutorial M02 QGIS GPKG Pipe Network: Difference between revisions
Content deleted Content added
Created page with "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing t..." |
Tuflowduncan (talk | contribs) |
||
| (5 intermediate revisions by 2 users not shown) | |||
Line 4:
=Method=
<li>
<li>Drag and drop the
<li>
<li>
<li>A number of the attributes within the '''1d_nwk_FMT_M02_Pipes_001_L''' layer have not been populated. Turn on Toggle Editing for the layer and add the following attributes to all objects leaving all other attributes unchanged. Make use of the ‘'Update All'’ function as previously explained to update all objects at the same time. <br>
Line 26:
|}
<br>
The attributes are described completely in
*The 1d_nwk type. In this case, we have specified culverts with a circular shape.
*The Manning’s n value of the culvert.
Line 32:
*The downstream invert level of the pipes. The same rules as for the upstream invert applies when specifying -99,999.
*The number of identical pipes in parallel. <br>
<li>
▲<li>Open the layer '''1d_nwk_FMT_M02_Pits_001_P.shp''' in QGIS. This contains digitised points that represent the pits of the pipe network through which water can transfer to and from the overlying floodplain.
▲<li>Drag and drop the layer '''1d_nwk_FMT_M02_Pits_001_P.shp''' into the project GeoPackage file <b>M02_5m_002.gpkg</b> in the Browser Panel. Close the layer in the Layers Panel.
<li>A number of the attributes within the '''1d_nwk_FMT_M02_Pits_001_P''' layer have not been populated. Toggle Editing for the layer and add the following attributes to all objects leaving all other attributes unchanged. Again, make use of the ‘Update All’ function in QGIS to update all objects at the same time:
<br>
Line 50 ⟶ 47:
|}
<br>
Note that although the same layer (1d_nwk) has been used to define the pits of the pipe network as for the culverts, different attributes have been populated. Refer to
<u>[https://docs.tuflow.com/classic-hpc/manual/2025.1/OneD-Domains-1.html#tab:tab-CulvertsAttributeDescriptions Table 5.5]</u> and <u>[https://docs.tuflow.com/classic-hpc/manual/2025.1/OneD-Domains-1.html#tab:tab-PitsModelNetwork Table 5.24]</u> of the TUFLOW Manual for further information on how the attributes of the 1d_nwk layer differ between nodes and channels. The attributes that we have populated for the pits, define:<br>
*The type of pit channel. In this case, a type ‘Q’ specifies the flow is to be defined by a depth-discharge curve from a user defined database. This database will be created in the next steps of this module.
*AB is the name of the pit inlet type referenced within the pit database.
Line 56 ⟶ 54:
<br>
<li> Open the layer '''1d_x1d_FMT_M01_nwk_001_P''' created in [[Flood_Modeller_Tutorial_Module01_Provisional | Flood Modeller Tutorial 1]]. Note that the pipe network has been digitised to outfall to the watercourse represented within the Flood Modeller Network. We will manually specify the downstream invert levels of Pipe16 and Pipe18 as the discharge point of the pipe network is above the bed level of the watercourse. Use the Info tool and click on each pipe in turn and change the ‘DS_Invert’ attribute for both pipes from -99,999 to 38m.
<li>Save both '''1d_nwk_FMT_M02_Pipes_001_L''' and '''1d_nwk_FMT_M02_Pits_001_P'''. <
<li>The Pit Inlet Database has been created and can be found within '''Module_data\Module_02\Pipe_Network'''. Copy the csv files '''pit_inlet_curves.csv''' and '''pit_inlet_dbase.csv'''’ into a new folder entitled '''pit_dbase''' within the TUFLOW folder.
<li>Open the '''pit_inlet_dbase.csv''' file. The Pit Inlet Database is similar to the Boundary Condition Database in that it references an external source file and relates this to corresponding GIS objects within the model. <br>
The first column contains the name of pit inlet type as referenced in the Inlet_Type attribute that was specified within the '''1d_nwk_FMT_M02_Pits_001_P.shp''' layer. The second column contains the name of the source .csv file that contains the depth-discharge curve. The third and fourth columns are the heading labels of the depth and discharge columns respectively in the source .csv file. The fifth and sixth columns are the inlet’s nominated full flow area in m<sup>2</sup> and flow width in m. <u>[https://docs.tuflow.com/classic-hpc/manual/2025.1/OneD-Domains-1.html#DD-Database-3
<br>
[[File:M07 pit inlet dbase.png]]<br>
Line 73 ⟶ 70:
1d_nwk layers have been created representing the culverts and pits that make the pipe network that of the proposed development. The layers have made use of an automated function to link the pits to the 2D domain to allow for the exchange of water between the pipe network and the floodplain. A Pit Inlet Database has been created to define a depth-discharge relationship at each pit. Please return to the main page of the[[Flood Modeller Tutorial Module02_Provisional#Define_Boundary_Conditions | Flood Modeller Tutorial 2]].
{{Tips Navigation
|uplink=[[Flood_Modeller_Tutorial_Module02_Provisional| Back to Tutorial Module 02 Main Page]]
}}
</ol>
| |||