Difference between revisions of "TUFLOW Message 1063"
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1063 - No data values found (zero array size). |alt_msg=NA |type=ERROR |message_desc=???? |suggestions=???? |discussion_page=* [[Talk:T...') |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=Missing data has been encountered within the source csv file referenced within a 1d_tab GIS layer for one or more columns. |
| − | |suggestions= | + | |suggestions=Open the source csv file and ensure data has been populated for all expected columns. <br> |
| − | | | + | |
| − | + | If using an optional flag within a XZ, CS or HW table, note that the data correlating to the flag must be entered within certain columns and differs for different flags. Refer to Table 4.17 within the 2010 Manual and <u>[[TUFLOW Message 1061|ERROR 1061]]</u> for further information. In this case, the text within the TLF file immediately encountered prior to the <u>[[TUFLOW Message 1061|ERROR 1061]]</u> message will specify which columns TUFLOW is expecting data. In the example below, the TLF file states that data in columns 1, 2 and 5 are expected within the "FC04.1_C_013.csv" file. <br> | |
| − | + | <br> | |
| − | + | [[File:ERROR1061.JPG]] | |
| + | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 14:37, 22 December 2022
TUFLOW Message
ERROR 1063 - No data values found (zero array size).
Alternate Message
NA
Message Type
ERROR
Description
Missing data has been encountered within the source csv file referenced within a 1d_tab GIS layer for one or more columns.
Suggestions
Open the source csv file and ensure data has been populated for all expected columns.
If using an optional flag within a XZ, CS or HW table, note that the data correlating to the flag must be entered within certain columns and differs for different flags. Refer to Table 4.17 within the 2010 Manual and ERROR 1061 for further information. In this case, the text within the TLF file immediately encountered prior to the ERROR 1061 message will specify which columns TUFLOW is expecting data. In the example below, the TLF file states that data in columns 1, 2 and 5 are expected within the "FC04.1_C_013.csv" file.
| Up |
|---|
 1xxx Messages
|