TUFLOW Message 1033: Difference between revisions
Content deleted Content added
Steph.dufour (talk | contribs) No edit summary |
No edit summary |
||
| (10 intermediate revisions by 4 users not shown) | |||
Line 4:
|type=[[ERROR]]
|message_desc=Cross-Sectional data for the channel named "XXXX" cannot be found.
|suggestions=Each channel requires a table describing its hydraulic properties to define its conveyance. The properties are normally defined by digitising a cross-section in a 1d_xs or 1d_tab layer positioned midway along the channel or at the channel ends. If the
* Only two vertices crossing the 1D network.
* In case of more than two vertices, one must be snapped onto a 1D network vertex.
The 1d_xs or 1d_tab layer references an external csv file (or similar formatted file) containing either a cross-section profile or a hydraulic properties table. The hydraulic properties can also be externally sourced from a Mike 11 or Flood Modeller. Note that structures such culverts (circular and rectangular only) and weirs, are an exception to the rule. The attribute information supplied within the 1d_nwk table are sufficient to define the hydraulic properties. <br>
<br>
Refer to
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
}}
| |||