TUFLOW Message 1152: Difference between revisions

From Tuflow
Jump to navigation Jump to search
Content deleted Content added
Created page with '{{TUFLOW_Message |tuflow_message=CHECK 1152 - For channel ",a,", using centre cross-section and ignoring end cross-section(s). |alt_msg=NA |type=CHECK |message_desc=???? |sug...'
 
No edit summary
 
(4 intermediate revisions by 3 users not shown)
Line 3: Line 3:
|alt_msg=NA
|alt_msg=NA
|type=[[CHECK]]
|type=[[CHECK]]
|message_desc=A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.
|message_desc=????
|suggestions=Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.
|suggestions=????

|discussion_page=* [[Talk:TUFLOW Message 1152|Discuss Message 1152]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1151|Message 1151]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1153|Message 1153]]
}}
}}

Latest revision as of 15:29, 22 December 2022

TUFLOW Message
CHECK 1152 - For channel ",a,", using centre cross-section and ignoring end cross-section(s).

Alternate Message
NA

Message Type
CHECK

Description
A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.

Suggestions
Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.


Up
1xxx Messages