TUFLOW Message 1991: Difference between revisions
Content deleted Content added
Created page with '{{TUFLOW_Message |tuflow_message=WARNING 1991 - ",a,": Negative depth at Node ",a,": "," y =",f7.2," Bed =",f7.2," Iter = |alt_msg=WARNING 1991 - ",a,": Negative depth at Node ...' |
No edit summary |
||
| (12 intermediate revisions by 4 users not shown) | |||
Line 3:
|alt_msg=WARNING 1991 - ",a,": Negative depth at Node ",a,": "," y =",f7.2," Bed =",f7.2," dh =
|type=[[WARNING]]
|message_desc=Numerical solution has resulted in a negative depth at 1D node. This indicates that the model is unstable or unhealthy in this area. Note that a separate warning is issued for convergence issues in the 2D domain (see <u>[[TUFLOW Message 2991|Message 2991]]</u>).
|suggestions=Import the messages layer in to your GIS package. Check for the number and time at which these warnings occur. A few warnings at a single location or timestep in the simulation are not normally an issue. Persistent warnings however warrant further investigation. Check the following: <br>
* Incorrect bed levels upstream or downstream;<br>
* A large change in cross-sectional area;<br>
* Very steep channel entering a gently or adverse grade channel;<br>
* Sudden change in flow area (for example a culvert width entered in mm not m, 1200mm rather than 1.2m);<br>
* Issues with 1D/2D linking (incorrect use of Z flag on culvert inlet / outlet);
* Too high a timestep; and<br>
* Too small a nodal area.<br>
<br>
For a more detailed description on identify the start of instability, refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>.
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
}}
| |||