TUFLOW Message 1056: Difference between revisions
Content deleted Content added
No edit summary |
No edit summary |
||
Line 5:
|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>
<br>
'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections.
'''“F”''' for a multiplication factor; or<br>
'''“N”''' for a Manning’s n value.
|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.
|discussion_page=* [[Talk:TUFLOW Message 1056|Discuss Message 1056]]
|link3=''
| |||