TUFLOW Message 1102: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
"X" Type channels do not require an ID. |
"X" Type channels do not require an ID. |
||
|suggestions=Give each 1d_nwk a valid and unique ID. |
|suggestions=Give each 1d_nwk a valid and unique ID. |
||
|discussion_page=* [[Talk:TUFLOW Message 1102|Discuss Message 1102]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1101|Message 1101]] |
|prelink=[[TUFLOW_Message_1101|Message 1101]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 16:33, 1 July 2022
TUFLOW Message
ERROR 1102 - Channel at ",a,",",a," does not have an ID.
Alternate Message
NA
Message Type
ERROR
Description
1d channels (1d_nwk) should have a unique identifier up to 12 characters in length in the "ID" GIS attribute. This may contain any character except for quotes and commas, and cannot be blank. As a general rule, spaces and special characters (eg. “\”) should be avoided, although they are accepted. The same ID can be used for a channel and a node, but no two nodes and no two channels can have the same ID.
Since Build 2005-05-AN, digitised nodes can have their ID left blank and TUFLOW will assign an ID.
"X" Type channels do not require an ID.
Suggestions
Give each 1d_nwk a valid and unique ID.
| Up |
|---|
 1xxx Messages
|