Difference between revisions of "TUFLOW Message 1103"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version. | |message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version. | ||
| − | |suggestions= | + | |suggestions=Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW. |
|discussion_page=* [[Talk:TUFLOW Message 1103|Discuss Message 1103]] | |discussion_page=* [[Talk:TUFLOW Message 1103|Discuss Message 1103]] | ||
|link3='' | |link3='' | ||
Revision as of 16:12, 31 January 2011
TUFLOW Message
ERROR 1103 - Must have ten extra attributes appended to 1d_nwk layer to use the weir over the top option.
Alternate Message
NA
Message Type
ERROR
Description
If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version.
Suggestions
Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW.
| Up |
|---|
 1xxx Messages
|