Difference between revisions of "TUFLOW Message 1104"
Jump to navigation
Jump to search
Line 5: | Line 5: | ||
|message_desc=Diameter for circular culvert (C type channel) is less than or equal to zero. | |message_desc=Diameter for circular culvert (C type channel) is less than or equal to zero. | ||
|suggestions=Ensure that the Width_or_Dia (14th filed) GIS attribute is greater than 0. This diameter is in metres, not mm! | |suggestions=Ensure that the Width_or_Dia (14th filed) GIS attribute is greater than 0. This diameter is in metres, not mm! | ||
− | + | ||
− | |||
− | |||
|prelink=[[TUFLOW_Message_1103|Message 1103]] | |prelink=[[TUFLOW_Message_1103|Message 1103]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1105|Message 1105]] | |nextlink=[[TUFLOW_Message_1105|Message 1105]] | ||
}} | }} |
Revision as of 16:34, 1 July 2022
TUFLOW Message
ERROR 1104 - Diameter of C culvert is less than or equal to zero.
Alternate Message
NA
Message Type
ERROR
Description
Diameter for circular culvert (C type channel) is less than or equal to zero.
Suggestions
Ensure that the Width_or_Dia (14th filed) GIS attribute is greater than 0. This diameter is in metres, not mm!
Up |
---|
1xxx Messages |