Difference between revisions of "TUFLOW Message 1107"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Irregular type culvert (I type channels) are only available when Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E. | |message_desc=Irregular type culvert (I type channels) are only available when Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E. | ||
| − | |suggestions=If using irregular culverts, use the default Culvert Flow == Method E. If you require a previous Culvert Flow for backwater compatability irregular culverts | + | |suggestions=If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used. |
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]] | |discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]] | ||
|link3='' | |link3='' | ||
Revision as of 16:33, 31 January 2011
TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.
Alternate Message
NA
Message Type
ERROR
Description
Irregular type culvert (I type channels) are only available when Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.
Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
| Up |
|---|
 1xxx Messages
|