TUFLOW Message 1107: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=Irregular type culvert (I type channels) are only available |
|message_desc=Irregular type culvert (I type channels) are only available with <tt>Culvert Flow == Method E</tt>. For more information on the <tt>Culvert Flow == </tt>command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for <tt>Culvert Flow == Method E</tt>. |
||
|suggestions=If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used. |
|suggestions=If using irregular culverts, use the default is <tt>Culvert Flow == Method E</tt>. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used. |
||
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]] |
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]] |
||
|link3='' |
|link3='' |
||
Revision as of 08:54, 1 February 2011
TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.
Alternate Message
NA
Message Type
ERROR
Description
Irregular type culvert (I type channels) are only available with Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.
Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
| Up |
|---|
 1xxx Messages
|