Difference between revisions of "TUFLOW Message 1156"
Jump to navigation
Jump to search
m |
|||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=A cross-section for the weir channel and the width attribute on the 1d_nwk file is being ignored. | + | |message_desc=A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored. |
|suggestions=Check that the cross-section width in the .csv file for the weir is appropriate. | |suggestions=Check that the cross-section width in the .csv file for the weir is appropriate. | ||
|discussion_page=* [[Talk:TUFLOW Message 1156|Discuss Message 1156]] | |discussion_page=* [[Talk:TUFLOW Message 1156|Discuss Message 1156]] | ||
Revision as of 14:46, 1 February 2011
TUFLOW Message
CHECK 1156 - Weir cross-section found (1d_nwk width ignored)
Alternate Message
NA
Message Type
CHECK
Description
A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored.
Suggestions
Check that the cross-section width in the .csv file for the weir is appropriate.
| Up |
|---|
 1xxx Messages
|