TUFLOW Message 1261: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value. |
|message_desc=Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value. |
||
|suggestions=Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process). |
|suggestions=Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process). |
||
|discussion_page=* [[Talk:TUFLOW Message 1261|Discuss Message 1261]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1258|Message 1258]] |
|prelink=[[TUFLOW_Message_1258|Message 1258]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 14:38, 5 July 2022
TUFLOW Message
ERROR 1261 - Invalid Manning's n value of ",a," assigned to channel
Alternate Message
NA
Message Type
ERROR
Description
Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value.
Suggestions
Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process).
| Up |
|---|
 1xxx Messages
|