TUFLOW Message 1314: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=The flow width of the manhole is less than the width of a culvert connected. For example a 1.8m wide culvert is connected to a manhole with a width of 1.5m. Data doesn't agree. |
|message_desc=The flow width of the manhole is less than the width of a culvert connected. For example a 1.8m wide culvert is connected to a manhole with a width of 1.5m. Data doesn't agree. |
||
|suggestions=Check manhole and culvert dimensions and correct. |
|suggestions=Check manhole and culvert dimensions and correct. |
||
|discussion_page=* [[Talk:TUFLOW Message 1314|Discuss Message 1314]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1313|Message 1313]] |
|prelink=[[TUFLOW_Message_1313|Message 1313]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 15:37, 5 July 2022
TUFLOW Message
ERROR 1314 - Maximum flow width of one or more culverts exceeds manhole flow width.
Alternate Message
NA
Message Type
ERROR
Description
The flow width of the manhole is less than the width of a culvert connected. For example a 1.8m wide culvert is connected to a manhole with a width of 1.5m. Data doesn't agree.
Suggestions
Check manhole and culvert dimensions and correct.
| Up |
|---|
 1xxx Messages
|