Difference between revisions of "TUFLOW Message 2014"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | |message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | ||
|suggestions=Source-Area polygon in outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended. | |suggestions=Source-Area polygon in outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2013|Message 2013]] | |prelink=[[TUFLOW_Message_2013|Message 2013]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2015|Message 2015]] | |nextlink=[[TUFLOW_Message_2015|Message 2015]] | ||
}} | }} | ||
Revision as of 15:55, 5 July 2022
TUFLOW Message
ERROR 2014 - No active cells within SA inflow polygon.
Alternate Message
NA
Message Type
ERROR
Description
No active 2D cells within Source over Area (SA) inflow polygon.
Suggestions
Source-Area polygon in outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended.
| Up |
|---|
 2xxx Messages
|