Difference between revisions of "TUFLOW Message 0020"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=This ERROR occurs when the -e or -s option occurs for the same ID. For example, if "-s1 exg -s1 OpA -s2 OpB" is specified when running TUFLOW, s1 has occurred twice, and therefore the intent is unclear. | + | |message_desc=This ERROR occurs when the -e or -s option occurs for the same ID. |
| + | |||
| + | For example, if "-s1 exg -s1 OpA -s2 OpB" is specified when running TUFLOW, s1 has occurred twice, and therefore the intent is unclear. | ||
|suggestions=Check and correct the repeat occurrences of the -e or -s option(s). | |suggestions=Check and correct the repeat occurrences of the -e or -s option(s). | ||
|discussion_page=* [[Talk:TUFLOW Message 0020|Discuss Message 0020]] | |discussion_page=* [[Talk:TUFLOW Message 0020|Discuss Message 0020]] | ||
Revision as of 08:25, 10 February 2011
TUFLOW Message
ERROR 0020 - Event/Scenario name already specified for -e/-s option.
Alternate Message
NA
Message Type
ERROR
Description
This ERROR occurs when the -e or -s option occurs for the same ID.
For example, if "-s1 exg -s1 OpA -s2 OpB" is specified when running TUFLOW, s1 has occurred twice, and therefore the intent is unclear.
Suggestions
Check and correct the repeat occurrences of the -e or -s option(s).
| Up |
|---|
 0xxx Messages
|