Revision as of 11:26, 12 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,091 edits No edit summary ← Older edit		Revision as of 11:46, 12 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,091 edits No edit summary Newer edit →
Line 2: =Introduction= This page provides guidance on a generalised method to convert a MIKE FLOOD model to a TUFLOW model format. MIKE Flood is the top level program that couples MIKE21 (the MIKE 2D engine and program) with MIKE11 (the MIKE 1D engine and program). These programs are referenced when converting the relevant setup to TUFLOW format. These steps could therefore also be used for converting stand-alone MIKE21 or MIKE11 models to TUFLOW format.<br><br>If you have any suggestions to be included in these pages, please email <font color="blue"><u>support@tuflow.com</u></font>. ==Requirements== Line 11: MIKE Zero is required to extract data from the MIKE FLOOD model. The tools required are freely available using the Demo version of Mike Zero.<br>For MIKE11 conversion, the xsGenerator utility has been made to automate some of the steps. The xsGenerator utility is freely available from the TUFLOW <u>[http://www.tuflow.com/Tuflow%20Utilities.aspx website]</u>. =Creating a TGC from ~~MIKE Flood~~MIKE21= = Model Conversion Utility (FLO2D_to_GIS.exe) =

MIKE Flood to TUFLOW: Difference between revisions