TUFLOW Message 2227: Difference between revisions

From Tuflow
Jump to navigation Jump to search
Content deleted Content added
No edit summary
No edit summary
Line 5: Line 5:
|message_desc=A line or polygon is searching for a trigger location as specified in the Trigger_1 or Trigger_2 attributes, this trigger location does not exist. To set a trigger location, a point object should be digitised with the Shape_Options attribute of "TRIGGER", the name of the trigger is entered into the Trigger_1 attribute.
|message_desc=A line or polygon is searching for a trigger location as specified in the Trigger_1 or Trigger_2 attributes, this trigger location does not exist. To set a trigger location, a point object should be digitised with the Shape_Options attribute of "TRIGGER", the name of the trigger is entered into the Trigger_1 attribute.
|suggestions=Check that every trigger location used is defined.
|suggestions=Check that every trigger location used is defined.

|discussion_page=* [[Talk:TUFLOW Message 2227|Discuss Message 2227]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2226|Message 2226]]
|prelink=[[TUFLOW_Message_2226|Message 2226]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]

Revision as of 14:27, 6 July 2022

TUFLOW Message
ERROR 2227 - Could not find Trigger Location <trigger name> for Variable Z Shape.

Alternate Message
NA

Message Type
ERROR

Description
A line or polygon is searching for a trigger location as specified in the Trigger_1 or Trigger_2 attributes, this trigger location does not exist. To set a trigger location, a point object should be digitised with the Shape_Options attribute of "TRIGGER", the name of the trigger is entered into the Trigger_1 attribute.

Suggestions
Check that every trigger location used is defined.


Up
2xxx Messages