Tuflow

TUFLOW Message 3008: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
Line 1:
{{TUFLOW_Message
|tuflow_message=ERROR 3008: nut_m must be >= 0. <br>
ERROR 3008: nut_c must be >= 0
<br>
|alt_msg=ERROR 3008: nut_c must be >= 0
|type=[[ERROR]]
|message_desc=When PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale ''lm'' and the turbulence intensity ''k'' as follows:
|message_desc=XX.
 
|suggestions=XX.
 
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_3008"