Difference between revisions of "TUFLOW Message 3027"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) |
|||
| Line 8: | Line 8: | ||
|suggestions=A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths. | |suggestions=A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths. | ||
| − | |||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_3026|Message 3026]] | |prelink=[[TUFLOW_Message_3026|Message 3026]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_3028|Message 3028]] | |nextlink=[[TUFLOW_Message_3028|Message 3028]] | ||
}} | }} | ||
Revision as of 15:19, 13 July 2022
TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.
Alternate Message
None
Message Type
ERROR
Description
The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.
Suggestions
A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.
| Up |
|---|
 3xxx Messages
|