Revision as of 19:21, 12 April 2011 view source tuflow>Par No edit summary ← Older edit		Revision as of 10:28, 13 March 2012 view source tuflow>Par No edit summary Newer edit →
Line 5: \|message_desc=Water level at '''HQ''' boundary has exceeded the top of the defined stage (H) V's flow (Q) relationship. \|suggestions=If a stage-discharge relationship has been defined consider extending this relationship for higher water levels. If a stage-discharge relationship is calculated by TUFLOW by defining a water surface slope, the boundary should be extended to higher ground. <br> The 2d_bc “d” attribute can be used to set the maximum depth of the automatically generated HQ curve (note d is a depth, not an elevation).<br> See also this post on the TUFLOW forum:<br> [http://www.tuflow.com/forum//index.php?showtopic=943 WARNING 2365 - Exceeded top of HQ curve.] ~~par??? insert image here.~~ \|discussion_page=* [[Talk:TUFLOW Message 2365\|Discuss Message 2365]] \|link3=''

TUFLOW Message 2365: Difference between revisions