Revision as of 13:37, 16 July 2018 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,090 edits No edit summary ← Older edit		Revision as of 13:55, 16 July 2018 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,090 edits No edit summary Newer edit →
Line 5: \|alt_msg= \|type=[[ERROR]] \|message_desc=''SMAGORINSKY turbulence model:''<br> \|message_desc=When PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale ''lm'' and the turbulence intensity ''k'' as follows:▼ When SMAGORINSKY turbulence model is used, ''nut_m'' is the Smagorinsky coefficient and ''nut_c'' is a constant eddy viscosity component. These two parameter must be >=0.<br><br> ''PRANDTL turbulence model:''<br> ~~\|suggestions=XX.~~ ▲~~\|message_desc=When~~If the PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale ''lm'' and the turbulence intensity ''k'' as follows:<br> <br> where ''nut_c'' is a constant component of the viscosity, and the maximum value of ''lm'' is limited by ''nut_m * depth'', where ''nut_m'' is a coefficient to define the turbulence length scale. \|suggestions=Make sure the parameters specified by the '''Viscosity Coefficients''' command is . \|discussion_page=* [[Talk:TUFLOW Message 3008\|Discuss Message 3008]]

TUFLOW Message 3008: Difference between revisions