Difference between revisions of "TUFLOW Message 3034"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
|suggestions=Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell. | |suggestions=Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell. | ||
| − | |||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_3033|Message 3033]] | |prelink=[[TUFLOW_Message_3033|Message 3033]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_3035|Message 3035]] | |nextlink=[[TUFLOW_Message_3035|Message 3035]] | ||
}} | }} | ||
Revision as of 15:20, 13 July 2022
TUFLOW Message
ERROR 3034: Number of hydrograph index layers exceeded. Maximum is 4.
Alternate Message
ERROR 3034: Number of hydrograph weight layers exceeded. Maximum is 4.
Message Type
ERROR
Description
In HPC solver, the number of hydrograph assigned at one cell is limited to 4 due to the memory management.
Suggestions
Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell.
| Up |
|---|
 3xxx Messages
|