Difference between revisions of "TUFLOW Message 2091"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Error reading MID file.
+
|message_desc=Error reading a .MID file, or unexpectedly reached the end of a .MID file.
|suggestions=Check the MID file. If the error is referring to the last line of the MID file which is blank, run the simulation with TUFLOW built 2018-03-AC or newer. Alternatively, the layer can be re-saved as a shapefile and the associated .dbf extension can be read in the simulation with “Read RowCol Mat” command.
+
|suggestions=Check if the MID file is being edited by another software. <br>
 +
If the error is referring to the last line of the MID file which is blank, run the simulation with TUFLOW built 2018-03-AC or newer. Alternatively, the layer can be re-saved as a shapefile and the associated .dbf extension can be read in the simulation with “Read RowCol Mat” command.
 
|discussion_page=* [[Talk:TUFLOW Message 2091|Discuss Message 2091]]
 
|discussion_page=* [[Talk:TUFLOW Message 2091|Discuss Message 2091]]
 
|link3=''
 
|link3=''

Revision as of 11:08, 2 January 2019

TUFLOW Message
ERROR 2091 - Error reading MID or other input file.

Alternate Message
NA

Message Type
ERROR

Description
Error reading a .MID file, or unexpectedly reached the end of a .MID file.

Suggestions
Check if the MID file is being edited by another software.
If the error is referring to the last line of the MID file which is blank, run the simulation with TUFLOW built 2018-03-AC or newer. Alternatively, the layer can be re-saved as a shapefile and the associated .dbf extension can be read in the simulation with “Read RowCol Mat” command.


Up
Go-up.png 2xxx Messages