Difference between revisions of "TUFLOW Message 1048"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=The '''Number_of''' or '''No_of_Culverts''' attribute on the 1d_nwk file is not valid for bridge or weir channels. For the channel ID specified, a value of greater than 1 has been specified and is being ignored. For culverts this is the number of culvert barrels. For example a value of 3 would indicate three parallel culverts. | |message_desc=The '''Number_of''' or '''No_of_Culverts''' attribute on the 1d_nwk file is not valid for bridge or weir channels. For the channel ID specified, a value of greater than 1 has been specified and is being ignored. For culverts this is the number of culvert barrels. For example a value of 3 would indicate three parallel culverts. | ||
|suggestions=As this attribute is not used by TUFLOW for a bridge or weir type channel, for clarity it is recommended that the attribute be left at 0 or 1. | |suggestions=As this attribute is not used by TUFLOW for a bridge or weir type channel, for clarity it is recommended that the attribute be left at 0 or 1. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1045|Message 1045]] | |prelink=[[TUFLOW_Message_1045|Message 1045]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1049|Message 1049]] | |nextlink=[[TUFLOW_Message_1049|Message 1049]] | ||
}} | }} | ||
Revision as of 15:57, 1 July 2022
TUFLOW Message
WARNING 1048 - For B or W channel <Channel ID> ignoring Number_of attribute value which is greater than 1.
Alternate Message
NA
Message Type
WARNING
Description
The Number_of or No_of_Culverts attribute on the 1d_nwk file is not valid for bridge or weir channels. For the channel ID specified, a value of greater than 1 has been specified and is being ignored. For culverts this is the number of culvert barrels. For example a value of 3 would indicate three parallel culverts.
Suggestions
As this attribute is not used by TUFLOW for a bridge or weir type channel, for clarity it is recommended that the attribute be left at 0 or 1.
| Up |
|---|
 1xxx Messages
|