Difference between revisions of "TUFLOW Message 1101"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). | |message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). | ||
| − | |suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer. | + | |suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a ad_nwk empty layer created with the latest TUFLOW release. <br> |
Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | ||
|discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]] | |discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]] | ||
Revision as of 14:44, 21 September 2020
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
NA
Message Type
ERROR
Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a ad_nwk empty layer created with the latest TUFLOW release.
Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
| Up |
|---|
 1xxx Messages
|