Revision as of 09:05, 10 August 2011 view source Bill Syme (talk \| contribs) Bureaucrats, Administrators 461 edits No edit summary ← Older edit		Revision as of 10:55, 10 August 2011 view source Bill Syme (talk \| contribs) Bureaucrats, Administrators 461 edits No edit summary Newer edit →
Line 4: \|type=[[ERROR]] \|message_desc=These two commands cannot be used together. Event text definitions can only be defined using one of these commands. <font color="green"><tt>BC Event Source == </tt></font> became available with the 2010-10 release and allows multiple event texts to be specified for assigning different event names to different boundaries, and is much more powerful than <font color="green"><tt>BC Event Text == </tt></font> which only allows one event text at any one time within the model. Also see [[TUFLOW Message 0031\|Message 0031]]. This message occurs when <font color="green"><tt>BC Event Source </tt></font> occurs after a <font color="green"><tt>BC Event Text </tt></font>. [[TUFLOW Message 0034\|Message 0034]] occurs when <font color="green"><tt>BC Event Text </tt></font> occurs after a <font color="green"><tt>BC Event Source </tt></font>. \|suggestions=Rework the commands so that only one of the above commands exists. Note, there is no limit to the number of times either of these commands is specified in a model, they just can't both exist in the same model. \|discussion_page=* [[Talk:TUFLOW Message 0030\|Discuss Message 0030]]

TUFLOW Message 0030: Difference between revisions