Difference between revisions of "TUFLOW Message 1626"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 1626 - Unconnected pit
+
|tuflow_message=ERROR 1626 - Unconnected pit.
 
|alt_msg=ERROR 1626 - Pit XXX not connected to a 1D network.<br>
 
|alt_msg=ERROR 1626 - Pit XXX not connected to a 1D network.<br>
 
WARNING 1626 - Pit XXX not connected to a 1D network.<br>
 
WARNING 1626 - Pit XXX not connected to a 1D network.<br>
 
|type=[[ERROR]],[[WARNING]]
 
|type=[[ERROR]],[[WARNING]]
 
|message_desc=Pit is not snapped or within the <font color="blue"><tt>Pit Search Distance </tt></font> <font color="red"><tt>==</tt></font>. Error forced by the ECF command <font color="blue"><tt>Pit No 1D Connection </tt></font> <font color="red"><tt>==</tt></font> ERROR.
 
|message_desc=Pit is not snapped or within the <font color="blue"><tt>Pit Search Distance </tt></font> <font color="red"><tt>==</tt></font>. Error forced by the ECF command <font color="blue"><tt>Pit No 1D Connection </tt></font> <font color="red"><tt>==</tt></font> ERROR.
|suggestions=Check the pit connection if all the pits should be connected (excluding VPI and VPO pits) of remove the command <font color="blue"><tt>Pit Search Distance </tt></font> <font color="red"><tt>==</tt></font>.
+
|suggestions=Check the pit connection if all the pits should be connected (excluding VPI and VPO pits) or remove the command <font color="blue"><tt>Pit Search Distance </tt></font> <font color="red"><tt>==</tt></font>.
 
|discussion_page=* [[Talk:TUFLOW Message 1626|Discuss Message 1626]]
 
|discussion_page=* [[Talk:TUFLOW Message 1626|Discuss Message 1626]]
 
|link3=''
 
|link3=''

Revision as of 14:35, 2 January 2019

TUFLOW Message
ERROR 1626 - Unconnected pit.

Alternate Message
ERROR 1626 - Pit XXX not connected to a 1D network.
WARNING 1626 - Pit XXX not connected to a 1D network.

Message Type
ERROR,WARNING

Description
Pit is not snapped or within the Pit Search Distance ==. Error forced by the ECF command Pit No 1D Connection == ERROR.

Suggestions
Check the pit connection if all the pits should be connected (excluding VPI and VPO pits) or remove the command Pit Search Distance ==.


Up
Go-up.png 1xxx Messages